- home
-
our products
-
Special-purpose devices for furnitures
Cutters and cutter heads with bore
Replacement tip router cutters and boring bits
Cylindrical Cuttes With Threathed Shank
Firewood splitters and circular saws for firewood
Combined Woodworking multifunctions Machine
Moulding, Routing and edge banding
Equipment for shops and factory
Material handling and forklift
Universal table for miter saws and machines
-
- news
- contacts
Home > Cutters Drills and Blades > Router cutters with cylindrical shank > Special design cutter > Type IC (323)
Type IC
Type IC Joint cutter for drawers
Joint cutter for drawers
The supplied cutter mounts the bearing Ø 7 mm, with which you can mill the frontal piece (picture 1 ).
Use the machine guides or buy the bearing Ø 32 mm and mill the side (picture 2). In this way you get the joint with a projection (picture 3).
If the side is too thick, you can mill it by using the bearing Ø 1 9 mm (picture 5). So you will get a stronger joint. If you do not want the projection you can play upon the thickness of woodpieces or mill the frontal pieces (picture 1 ) with the bearing Ø 13 mm or the bearing Ø 19 mm
Joint cutter for drawers
The supplied cutter mounts the bearing Ø 7 mm, with which you can mill the frontal piece (picture 1 ).
Use the machine guides or buy the bearing Ø 32 mm and mill the side (picture 2). In this way you get the joint with a projection (picture 3).
If the side is too thick, you can mill it by using the bearing Ø 1 9 mm (picture 5). So you will get a stronger joint. If you do not want the projection you can play upon the thickness of woodpieces or mill the frontal pieces (picture 1 ) with the bearing Ø 13 mm or the bearing Ø 19 mm
Technical data
HM - HW
Ø | ht | LT | Art.G.ø 8 | Art.G.ø 12 |
40 | 14 | 50 | 1990 | 1991 |
Item code
1990, 1991