Trimming and rebating cutter with interchangeable tips
Trimming and rebating cutter with interchangeable tips
In figure 1 the cutter is used for trimming.
When the blade has became blunt, it can be rotated and the cutter is like new. For producing rebates (figure 2) it is necessary to replace the standard ball-bearing of 19 mm diameter with the optional one of 13 mm diameter.
N.B. on the cutters of 30 mm and 50 mm cutting length replace also the blade.
HM - HW
| Ø | ht | LT | Art.S.ø 6 | Art.S.ø 8 | Art.S.ø 12 |
| 19 | 12 | 55 | 2534 | 2535 | |
| 19 | 30 | 67 | 2536 | 2537 | |
| 19 | 50 | 95 | 2538 |
Standard spare parts
| Ø/L | ø/h | S-ht | Codice | Descrizione |
| 12 | 12 | 1,5 | 184001120 | Knife 4 side |
| 30 | 12 | 1,5 | 184000300 | Knife 2 side |
| 50 | 12 | 1,5 | 184000500 | Knife 2 side |
| 19 | 6 | 5 | 506263000 | Bearing |
| M4 | 8 | 973810408 | Tork Screw |
Accessories on request
| Ø/L | ø/h | S-ht | Codice | Descrizione |
| 29,5 | 12 | 1,5 | 184002300 | Knife 4 side |
| 49,5 | 12 | 1,5 | 184002500 | Knife 4 side |
| 13 | 6 | 5 | 506863000 |
Bearing |
| T15 | 90002T150 | Tork Key |
GAMMA ZINKEN
Viale Lombardia 10/D
I-20081 Cassinetta di Lugagnano (MI)
ITALY
P.Iva 04177360155
associato