Ring tool
Termite Tool
The Termite tool has been designed to hollow into a workpiece and consists of an interchangeable cutting tip secured into a shaft by means of a set screw. It is a versatile tool that saves you money. Its shaft is made of steel and is nickel-plated to make it more wear-resistant. Its aluminium handle is telescopic and enables the shaft to get 185 mm shorter in case you have to work on small objects.
A special jointed handle, more difficult to use, is available for undercutting situations.
Termite Hollowing Cutting Tip
Hollowing out the inside of the wood is one of the most difficult process. Because of its unusual shape that helps chip ejection and guarantees a good control while turning any type of wood, the Termite cutting tip allows you to hollow a workpiece effectively.
| mm | Lt | L | Art. | Code | Set |
| 10 | 50 | 30 | 3818 | JTWB60610 | |
| 16 | 50 | 30 | 3819 | JTWB60616 |
Termite Straight Handle
Hollowing out the inside of the wood is one of the most difficult process. The handle is made of steel and is nickel-plated to make it more wear-resistant. It comes with a 16 mm diameter Termite cutting tip.
| mm | Lt | L min |
Art. | Codice | Set |
| 14 | 800 | 615 | 3823 | JTWB60255 |
Termite Round-Nose Chisel Cutting Tip
Inner surface finishing is the most difficult process. This Termite round shaped cutting tip allow you to get the desired finishing on any internal surface. Because of its unusual shape it enables you to have a good control on all operations.
| mm | Lt | L | Art. | Codice | Set |
| 16 | 50 | 30 | 3820 | JTWB66016 |
Termite Jointed Handle
This jointed handle enables the Termite cutting tip to perform undercutting operations. It consists of two tilting joints that can also be used individually. The possible positions are 0°, 30°, 60° and 90° in relation to the axis of the handle. On the Termite cutting tip an adjustable chip limitor is mounted to avoid an excessive material removal. It comes with a 16 mm diameter Termite cutting tip.
| Ø mm | Lt | L min |
Art. | Codice | Set |
| 17 | 830 | 635 | 3822 | JTWB62255 |
Termite Square-Nose Chisel Cutting Tip
Inner surface finishing is the most difficult process. This Termite square shaped cutting tip allow you to get the desired finishing on any internal surface. Because of its unusual shape it enables you to have a good control on all operations.
| mm | Lt | L | Art. | Codice | Set |
| 16 | 50 | 30 | 3821 | JTWB65016 |
Il manico con termite con 2 snodi può essere usato anche con un solo snodo, consigliamo di inclinarlo di soli 30°, perchè a 60° e oltre è necessaria grande forza per poterla gestire.
Particolari del manico con snodi per termite
GAMMA ZINKEN
Viale Lombardia 10/D
I-20081 Cassinetta di Lugagnano (MI)
ITALY
P.Iva 04177360155
associato