Eccentric spindle balanceable
Eccentric spindle balanceable
Eccentric spindle balanceable
Permits to balance the eccentric weight of the wood, by means of the two balancing discs, to reduce vibrations during processing and improve the stability of the lathe

This spindle allows you to safely secure a piece that has an uneven surface such as a trunk with its bark.
It is also possible to balance the eccentric weight of the wood, by means of the two balancing discs, to
reduce vibrations during processing and improve the stability of the lathe. The advantage of this system
is the greater robustness and precision, moreover, the gripping force is exerted only in the heart of the wood and not on the external edge, ensuring that the wood does not break.
Use: after having made, with the aid of a Ø 25 mm drill, a hole of sufficient depth in the trunk (max 60
mm), insert the piece on the spindle and rotate, the trunk will automatically lock.
Equipped with two Ø 100 mm balancing discs, it allows you to cancel the unbalancing on the lathe of
a piece up to 2 kg.
Balancing the system on the lathe is simple, once the spindle is mounted with the workpiece on the
lathe, well tightened, lift the lathe motor and completely loosen the transmission belt, in this way the
greater weight will go down. Loosen the screws and the lock nuts of the rocker arms and adjust the
balancing discs a little at a time until the system no longer turns by itself, i.e. it is balanced.

Technical data
Ø Lt attacco  ART.
M 33 X 3,5  93  M 33 X 3,5  4207
Item code
4207
Eccentric spindle balanceable