Home > Woodturning and Carving > 4 Jaw wood chuck, Interchangeable Point Drive and Live Centers > Faceplate (450)
Faceplate
Faceplate
The faceplate is a simple and effective system for fixing a piece of wood on the lathe, by means of screws in an area which will then turned or in an area "dead" of the wood.

The advantage of the pad is the sealing of large diameters, attention to the screws that are used in relation to the type of wood, such as beech has a low resistance for the screws of the head, then use screws with a diameter or length suitable for the dimensions of the piece .

Technical data
Ø F  Ø mm  Ø Max mm Art
1”x8 TPI 70 320 3915
1”x8 TPI 150 600 3916
3/4”x16TPI 70 320 3917
3/4”x16TPI 100 380 3918
3/4”x16TPI 150 600 3919
1-1/4”x8TPI 70 320 3926
1-1/4”x8TPI 100 380 3920
M33x3,5 70 320 3921
M33x3,5 150 600 3922
M33x3,5 230 900 3923
Item code
3915, 3916, 3917, 3918, 3919, 3920, 3921, 3922, 3923, 3926