Home > Woodturning and Carving > 4 Jaw wood chuck, Interchangeable Point Drive and Live Centers > NGz/SC Self-Centering Four-Jaw Chuck > Long Nose Jaws Set (319)
Long Nose Jaws Set
Long Nose Jaws Set
Jaws are very used to remove the workpiece from the danger zone represented by the spindle

These extremely flexible jaws feature internal and external dovetails for bowl work. The deep internal grip is versatile but main benefit of these jaws is to project the work away from the chuck, allowing good tool access to the base of the timber for cleaning and shaping.

Technical data

Expanding Action Contracting Action  

Ø min 

internal

Ø max

internal

◊ min 

external

◊  min 

external

Ø min 

external

Ø min 

external		 Art
54 74 28 48 38 58 4040
Item code
4040
Long Nose Jaws Set
You May Also:
prodotto
Set Chuck 4 Jaw SC3
Small and compact design, it’s an ideal chuck for small lathes with up to 360 mm/14” diameter swing.
pagina consigliata
Tailstock interchangeable heads for wood turning
The live wood lathe tailstock has a body formed by an attack Morse taper and a rotating part supported by two bearings lubricated sealed + Ingrado a thrust bearing to support an axial load of 13.200N (about 1.300kg). On this body tailstock apply heads of various shapes depending on the needs of the turning. The tailstock for wood is different from that for metal, in fact, in addition to the tip has a special crown that penetrates a little in wood compressing and holding the work piece by absorbing the effort of turning; the central tip can be removed...
pagina consigliata
Drivers with interchangeable heads for wood turning
The winder for wood lathe is composed of a Morse taper which may have measure 1, 2 or 3 (the abbreviations are commonly used: CM2, MK2, MT2), or a suitable attachment to the socket of spindle (for not having to remove the spindle from the machine) Of these attacks apply different heads 2, 4 prongs or the type Multipoint depending on the needs of the turning. The entrainer standard supplied with the lathes, due to the vibrations and strokes of roughing, affects the wood and ends to rotate the timber off the axis of rotation ideal. With the use of...
prodotto
Self centering 4 Jaw SC4 Chuck
This powerful and solid chuck is perfect for use on lathes from 350 mm /14” to 508 mm/20” diameter swing.
pagina consigliata
Finishing product
Finishing and waxes, sanding seaer and aereosol, oils, cream, polish and spirit stain. The finish of a product is the conclusion of a job; firnirlo evil and so inappropiato destroys or diminishes all the effort. Finally an object means allow to preserve it from wear and tear due to the handling, by the passage of time, protecting it from dust and to chemical agents for cleaning. Means to enhance and also the effect of the warm and pleasant wood. Gamma Zinken range offers a wide range of products for the wood finish, relevant to the interior and...