Home > Woodturning and Carving > Finishing product > Resins and fillers for wood > AQUARES casting resin 200 + 100 g (678)
AQUARES casting resin 200 + 100 g
JSCW15786, AQUARES casting resin 200 + 100 g
AQUARES casting resin 200 + 100 g
Aquares is a high transparent and fast dry epoxidic resin, safe and approved for food contact.

Aquares is a high transparent and fast dry epoxidic resin, safe and approved for food contact.

This resin contains UV stabilizers and it’s used as an artistic finishing, like for example mosaics, photography, tables, woodturning and more.

TIPS FOR USING: If you project contains some unsupported parts, it will be necessary to create a containment for it, to avoid leakage.

For containment/mold materials like silicone, polypropylene and polyethylene or use adhesive paper to plug tiny cracks in little woodturning items, this to make sure resin won’t stick to them definitively.

If you choose to use a material different from the ones mentioned before, please use a release agent.

It can be used also with pigments and colored liquids, opacity/transparency depends by different factors, more common: pigments type or mixing with resin.

AQUARES can be used as finish, if poured on the item totality. If a natural look is desired (to get a look like no resin was poured) smooth finishing resin then polish it.

WAY TO USE:

  • For a GLOSSY finish: First,the surface doesn’t need to be completely smooth or flat, but In case it is, the quantity of resin needed will be less. Smooth the entire surface, including parts where may the resin wa already poured (even different one from Aquares), even if resin will look damaged after this passage, when AQUARES will be poured scratches will completely disappear. Aquares layer should be at least 2mm.​
  • For a NATURAL finish: Smooth the item’s entire wood and resin surface, starting with abrasive paper,from thicker grain to the finest when you’re almost at the desired point.

We suggest you to start using a 120,240,400,800 and end with a 1200 type.

In you prefer that your artwork wood pieces have a natural finishing look, in contrast with the resin glossy part, you should sand the wood part and finish it with a wax or another finishing product that you like.

MIXING Resin: hardener 100:50

Complete drying time: 24 hours

Working malleability: 20-30 minutes

Technical data
Item code
JSCW15786
AQUARES casting resin 200 + 100 g
You May Also: