- home
-
our products
-
Special-purpose devices for furnitures
Cutters and cutter heads with bore
Replacement tip router cutters and boring bits
Cylindrical Cuttes With Threathed Shank
Firewood splitters and circular saws for firewood
Combined Woodworking multifunctions Machine
Moulding, Routing and edge banding
Equipment for shops and factory
Material handling and forklift
Universal table for miter saws and machines
-
- news
- contacts
Vacuseal it’s a thermosetting resin used to stabilize and harden wood and all porous materials, low viscosity, and doesn’t require to be mixed with other products. It can be colored using Kolor P.
HOW TO USE IT :
Place the selected piece of wood clean and dry in a vacuum chamber, pour resin on it making sure the piece absorbs completely it (at least a 25mm layer) and depressurize (-0.9 bar) till there aren’t any more bubbles.
Interrupt the depressurization and leave the piece inside the chamber for at least twice the time the depressurization was active.
Before proceeding into the next step wait at least for two hours.
Remove the piece from the chamber, wrap it with aluminum foil and then bake it at 90°C from 5 minutes (for little pieces with slight thicknesses resin layers) to one hour (or more) in case of bigger pieces with considerable resin quantities.
Since the wood piece is soaked in resin, the baking time and the high temperature won’t damage in any way the wood.
When the cooking is ended remove the aluminum foil and leave the piece cooling down at room temperature.
The excess resin can be reused when stored in a container placed in a dark and cold place, better if refrigerated.
ATTENTION! After that has been baked in the oven, leave the piece cooling down at room temperature in an airtight container. This passage is necessary because the wood piece, hot and dry after the baking, will start collecting humidity as soon as it will start cooling down. Don’t stabilize hot wood pieces otherwise, premature polymerization will start.
Validity from opening: 8-12 months.