Home > Woodturning and Carving > Wood lathe > Wood lathe JWL 1421 VS (520)
Wood lathe JWL 1421 VS
Wood lathe JWL 1421 VS
Professional bench lathe, the best lathe on the market, very stable, quiet and robust

The best lathe on the market, very stable, silent and robust.

The JWL-1421VS professional bench lathe is a compact large diameter lathe based on the JWL-1221VS. With dimensions similar to it, it can handle parts with a diameter of up to 350 mm (14 inches): bowls, plates, dishes and other objects.

    Solid cast iron bed
    The JET novelty in transforming, with many design improvements, optimally the 3 rotation speeds from 60- to 3600 rpm.
    An electronic speed control system
    Digital speed display
    Reversal of the direction of rotation
    Tension and release the drive belt with a quick locking lever
    Quality tailstock with trapezoidal thread

The machine belongs to the new professional Jet line and combines modern control electronics with improved mechanical parts.

It has significantly increased rigidity: compared to analogues of the previous series and competitors, the bed has become wider and the total weight has increased by 10 kg; oversized bearings are used.

The rotation speed can be adjusted using the integrated electronics and the three quick-change pulleys, the selected value is shown on the digital display.

There is also a reverse rotation switch on the control panel, which is indispensable for some types of work, for example when sanding.

The transmission of the rotation from the motor to the spindle is carried out by a 6-groove PloyV belt; three pairs of pulleys are provided to select the required power range. The belt is quick-change via a patented ratchet lever.

The eccentric locking systems of the tool rest and tailstock make adjustments just as easy and quick. There are an index dividing device and a locking pin of the loaded mandrel, which also simplifies the assembly/disassembly on the faceplate mandrel (this requires only a key).

The bed extension can be purchased separately, in this case, the maximum distance from centre to centre will increase to 1010 mm.

Technical data

Tabella Tecnica

Stock number 220V J10000503M- 112213
Ø turning over the bed 368 mm
Ø turning over tool holder 288 mm
Distance between centres 520 mm
Spindle thread M33x3,5
Speed ​​3 ranges 60÷900, 110÷1.800, 220÷3.600 RPM/min
Spindle passage hole ø 9 mm
Tailstock passage hole ø 9 mm
Conical spindle and tailstock connection CM 2
Power output S1 100 750 W
Power consumption S6 40 950 W
Dimensions 900x360x580 mm
Weight 57 Kg
Item code
J10000503M, 112213
Standard equipment
Tailstock with removable tip
4-prong driver
Tool holder 150mm and 350mm
Piece holder pad 75 mm
Wood lathe JWL 1421 VS
You May Also: