Home > Woodturning and Carving > Woodturning gouges > Ring tool > Termite Straight Handle (442)
Termite Straight Handle
The pictures show art 4030 + 4022
Termite Straight Handle
Termites are tools for internal turning constituted by a replaceable head which is fixed by a screw to a handle.

Straight Termite Tool
Easier to use and ideal for both inexperienced woodturners and experts.
Available in different tool shapes: you can choose the tool that meets your requirements.
The interchangeable tip termite hollowing tool is the only one that can be used to turn the external faces of the workpiece: bigger tips are suitable for this purpose only.

Handle for termite rod4030_Manico_term.png
For use with all kind of available straight termite-holder shanks (to buy separately). The straight termite-holder shank slides into the handle making it possible to adjust the tool length by 200 mm.

ø Hole Ø handle L t Art.
14 mm 35 mm 350 4030

 

Straight termite-holder shanks to complement handle


Straight termite holder complete with round HSS termite
4022_asta-termite.pngIdeal for hollowing operations. It guarantees a good control for the turning of workpieces across the grains and for briarwoods. Suggested for woods of . medium-hardness. Experts can use it on wet woods without chip limiter.
Used with both 10 mm and 16 mm diameter round termite cutters for hollowing operations.
Both the 6 mm diameter profiling and finishing termite tools are suitable for turning on the external faces of a workpiece.
Includes: HSS Ø 16 mm termite cutter with limiter.

 

ø termite Ø holder L min L max Art.
16 mm 14mm 450 ÷ 700 4022

Straight termite holder complete with round HSS termite4023_asta_bicchier-term.png
Ideal for hollowing operations. It guarantees a good control for the turning of workpieces across the grains and for briarwoods. Suggested for woods of . medium-hardness. Experts can use it on wet woods without chip limiter.
Used with both 10 mm and 16 mm diameter round termite cutters for hollowing operations.
Both the 6 mm diameter profiling and finishing termite tools are suitable for turning on the
external faces of a workpiece.
Includes: HSS Ø 16 mm termite cutter with limiter.

 

ø termite Ø holder L min L max Art.
16 mm 14x420mm 450 ÷ 700 4023


Straight Shank complete with HM Roughing Termite Tip4024_asta--term11HM.png
For hollowing the inside of woodpieces out in a very quick and efficient way. Ideal for
hardwood and sanding wood, particularly for seasoned wood that chips easily.
It is used with a cutting angle from 15° to 45° and allows for a good work control. It is also
suitable for inexperienced woodturners.
Includes: Ø 11 mm HM roughing termite tip.

ø termite Ø holder L min L max Art.
11 mm 14x420mm 450 ÷ 700 4024

 

Straight Shank complete with Replaceable Termite Tip4025_asta_cesello-termHM.png
Specially designed for turning on the inside of the workpiece. It is used at a cutting angle of 45° such as a scraper tool. The bigger tips are designed for external workings. Tips are made from hard metal (HM) to cut hardwood, sanding wood and seasoned wood. See table for further details about the available tips.
Includes: 16 mm diameter round HW termite tip.

 

 

ø termite Ø holder L min L max Art.
16 mm 14x300mm 450 ÷ 600 4025

Straight Shank complete with Replaceable Termite Tip
Specially designed for turning on the inside of the workpiece. It is used at a cutting angle
of 45° such as a scraper tool. The bigger tips are designed for external workings. Tips are
made from hard metal (HM) to cut hardwood, sanding wood and seasoned wood. See table
for further details about the
available tips.
Includes: 16 mm diameter
round HW termite tip.

Technical data
Parts and Accessories
Optional and spare parts
Optional and spare parts
Art 3898
Optional and spare parts
Optional and spare parts
Art 3919 d.16mm and Art 3918 d.10 mm
Optional and spare parts
Optional and spare parts
Art 3899
Optional and spare parts
Optional and spare parts
art 4021
Optional and spare parts
Optional and spare parts
Item code
4022, 4023, 4024, 4025, 4030
Mounting example art 4022 + 4030
Termite Straight Handle
Example art. 4023 + 4030
Termite Straight Handle
Example art 4024 + 4030
Termite Straight Handle
Example art 4025 + 4030
Termite Straight Handle
The corrected angle of attack on the wood is about 40 ÷ 45 ° and you can make long cuts at the bottom of rotations or to give the final shape to the object; maintaining the correct angle of attack is achieved an excellent finish even in the stretch against grain
Termite Straight Handle
Termite Straight Handle
You May Also:
prodotto
Termite Hollowing Cutting Tip
The Termite, due to its special shape allows you to dig effectively being able to download the chip gouges better than other product. Thanks to the shape of the cutting edge gives a good control at all stages of work on any type of wood. the termite Ø 10mm has a drain while having easy control on all occasions, the termite Ø 16mm removes more material, so we recommend using a turner or expert, we suggest you mount her limiter.
prodotto
Parts termite
The termite Ø 16 mm works with or without limiter. The limiter offers the advantage of being able to better control the working tool. We provide this practical set consists of 2 parts termites Ø 16mm restrictor and a screw. The limiter can be changed by the turner according to their experiences.
prodotto
Tool sharpening termite
The sharpening of the termite is not difficult, just have a drill fitted with a chuck with good concentricity and this special countersink three cuts in hard metal (tungsten carbide)
prodotto
Termite for profiling and details
This particular tool allows to perform circular profiling and details for finishing
prodotto
Termite finishing details
Hard metal (HM) tip to be used on its proper tool-holder.