Home > Woodworking Machines > Drum and brush sander > Drum sander 22-44 Plus (172)
Drum sander 22-44 Plus
The photo shows the grading 22-44 plus with the support legs with top art 609004 and plans extension Art 98-2202
Drum sander 22-44 Plus
The grading for the craftsman
Cast iron structure, engine over-sized automatic feed rate in function of the removal and fine adjustment of the parallelism make this machine an indispensable tool for the craftsman with a modest production of furniture in general.

Despite being open on one side the robust and well-dimensioned structure does not generate bending during work, and in addition the machine is provided with an adjustment tolerance of 0.2 mm (the vibrations of transport do not allow to ensure better), but the customer after installation, it can act on the regulation of parallelism and increase accuracy as you like.

This applies to the JET machines, there is no guarantee for the competitor

  • Extruded aluminium drum – self-cooling, and balanced
  • Automatic reduction of the rate of advance to avoid excessive material removal (Sand Smart)
  • Infinitely variable feed rates ranging from 0–3 m/min and a drum speed of 1400 rpm guarantee maximum sanding results
  • Sanding drum is easily adjustable parallel to the table
  • Sealed drum ball bearings are sealed and permanently lubricated
Technical data
Model 22-44 plus
Cod. art 230 V 649003 KM
Width 560 mm
Max. width 1120 mm
Min. length  60 mm
Min. thickness 0,8 mm
Max. thickness 100 mm
Dimension drum 127 x 560 mm
Variable feed 0 - 3 m/1'
Speed drum 1400 giri/1'
Dust port 100 mm
Potwer output S1 1300 W
Power input S6 2300 W
Dimension 1050 x 680 x 1300 mm
Weight 115 Kg
Parts and Accessories
Optional accessory
Optional accessory
Roll of sanding belt 25 m cut to size
Art 306399.01 Grit 60 G
Art 306400.01 Grit 80 G
Article 100 G 306401.01 Grit
Article 120 G 306402.01 Grit
Article 150 G 306403.01 Grit
Article 180 G 306404.01 Grit
Optional accessory
Optional accessory
Cleaning stick
Optional accessory
Optional accessory
Art 98-0130
Set 4 wheels swivel castors with brake
Optional accessory
Optional accessory
Art 98-2202
Extension shelves for long workpieces
Optional accessory
Optional accessory
Article 608004
Stand with shelf and anti-slip feet
Item code
Standard equipment
• One 100 grit abrasive conveyor belt
• Sanding belt 80 G
• One box of abrasive strips
• Cleaning stick
The crankcase is full aperture to facilitate the replacement of the abrasive
Drum sander 22-44 Plus
The special system for tensioning the tape keeps it taut during processing, thus ensuring a perfect finish
Drum sander 22-44 Plus
Drum sander 22-44 Plus
You May Also: