Model A This is a traditionally designed beechwood bench intended for use in the larger workshop. The heavy duty 1900 x 610mm top is 40mm thick and fitted with a 120mm deep apron and has a well at the rear for storing tools. There are two wooden vices equipped with central screws and twin support bars; the front vice is a massive 500mm long and the tail vice is 480mm long by 250mm wide. The tail vice has an offset screw to allow timber to be held vertically between the screw and one of the bars without the vice distorting. There are two dog holes in the tail vice and a further ten in the bench top. The underslung tool storage drawer is 450mm long.

A series of rectangular holes in the floor and in the grip side allow to tighten lareramente pieces of considerable size.
The shelf for tools placed on the floor allows you to always have the tools at hand and at the same time the platform free to best support your work.

Terms of delivery
Cardboard box, legs, clamps and drawer removed, including bolts and screws for assembly.
wood:
Grade beech, steamed, elements section 40x50 mm length 300 mm, spliced, and cross to give greater strength and rigidity, matching wood color uniform.
Finish: G120 sanding, paint natural color.