- home
-
our products
-
Special-purpose devices for furnitures
Cutters and cutter heads with bore
Replacement tip router cutters and boring bits
Cylindrical Cuttes With Threathed Shank
Firewood splitters and circular saws for firewood
Combined Woodworking multifunctions Machine
Moulding, Routing and edge banding
Equipment for shops and factory
Material handling and forklift
Universal table for miter saws and machines
-
- news
- contacts
Home > Woodworking Machines > Thickness and planers
Thickness and planers
Among the most beautiful planes in the world you can find the universal wire and thick, with the top in cast-iron block, the output unit with the rubber roller for not "doing the jump" on the wood at the end of the piece and is very important for switch to wire thickness and vice versa do not have to remove the guides and guards, without loss of time, as opposed to competitors mote planes and machines multi processing.
The two greatest thickness planers are the best you could ask for in terms of durability and quality, such as the thickness planer with carbide inserts.
Gamma Zinken offer professional planers, also with the plane transportable account was taken of the trade measures of the wood, in fact the width is 318 mm, the standard measure of the axes of most of essences is 30 cm.
The planes Holzstar are good machines for your hobby, take advantage of the principles used and applied to the professional machines but keeping costs down.
The two greatest thickness planers are the best you could ask for in terms of durability and quality, such as the thickness planer with carbide inserts.
Gamma Zinken offer professional planers, also with the plane transportable account was taken of the trade measures of the wood, in fact the width is 318 mm, the standard measure of the axes of most of essences is 30 cm.
The planes Holzstar are good machines for your hobby, take advantage of the principles used and applied to the professional machines but keeping costs down.
Professional Planer Thicknesser JPT 310HH / JPT 410HH
Plane helical carbide inserts 4-sided reversible
The planes combined JPT 310, 410 HH are innovative for the tree consisting of carbide inserts arranged spirally on four principles.
The cut is smooth and quiet because the work is divided among many asportazioe sharp.
A good knife steel tell an average of 100 hours of work, a carbide knife works for about 2000 hours. Do not change over a set of knives but you can turn the knife is worn out or just what if you were injured by a nail or impurity of the wood.
The ground wire in a single block, allows...