Home > Woodturning and Carving > 4 Jaw wood chuck, Interchangeable Point Drive and Live Centers
4 Jaw wood chuck, Interchangeable Point Drive and Live Centers
Professional 4 Jaw wood chuck, Interchangeable Point Drive and Live Centers, Self-Centering Finishing Clamping Plate, Woodscrew Chuck, Chuck adapter, faceplates
Tailstock interchangeable heads for wood turning
Tailstock interchangeable heads for wood turning
The live wood lathe tailstock has a body formed by an attack Morse taper and a rotating part supported by two bearings lubricated sealed + Ingrado a thrust bearing to support an axial load of 13.200N (about 1.300kg). On this body tailstock apply heads of various shapes depending on the needs of the turning. The tailstock for wood is different from that for metal, in fact, in addition to the tip has a special crown that penetrates a little in wood compressing and holding the work piece by absorbing the effort of turning; the central tip can be removed...
Drivers with interchangeable heads for wood turning
Drivers with interchangeable heads for wood turning
The winder for wood lathe is composed of a Morse taper which may have measure 1, 2 or 3 (the abbreviations are commonly used: CM2, MK2, MT2), or a suitable attachment to the socket of spindle (for not having to remove the spindle from the machine) Of these attacks apply different heads 2, 4 prongs or the type Multipoint depending on the needs of the turning. The entrainer standard supplied with the lathes, due to the vibrations and strokes of roughing, affects the wood and ends to rotate the timber off the axis of rotation ideal. With the use of...
NGz/SC Self-Centering Four-Jaw Chuck
NGz/SC Self-Centering Four-Jaw Chuck
Our mandrels have 4 jaw chucks. The jaws are held for the piece is expanding both in contraction. The slide shoe holder has a great workpiece clamping prevents excessive opening ensuring a great and safe clamping. They are available a wide range of designer labels for multiple uses, and are specific to these spindles. The jaws of these chucks are interchangeable, they can't be mounted on different chuck.
ECO Self-Centering Four-Jaw Chuck
ECO Self-Centering Four-Jaw Chuck
Our mandrels have 4 jaw chucks, qestaserie has a great value for money.
Woodscrew Chuck
Woodscrew Chuck
Useful woodturning accessory to clamp workpieces up to max. 300 mm in diameter
Finishing Clamping Plate
Finishing Clamping Plate
Is used for taking the final and the elimination of the spindle socket created for the processing of bowls and vases
Collet Chuck Holder ER25 for headstock
Collet Chuck Holder ER25 for headstock
Used in the headstock to hold cylindrical pieces and rotating tools for woodturning lathe
Eccentric spindle
Eccentric spindle
This chuck allows you to hold a woopiece securely with a lateral grip.
Chuck adapter
Chuck adapter
Joining a spindle lathe is easy, all you need is the right adapter.
Faceplate
Faceplate
The faceplate is a simple and effective system for fixing a piece of wood on the lathe, by means of screws in an area which will then turned or in an area "dead" of the wood.
Conical chuck
Conical chuck
The particular cylindrical shape, without any harshness makes it safe even if you are and work very closely with gouges
Self-Centering Drill Chuck
Self-Centering Drill Chuck
On the lathe you can drill a piece mounting this chuck instead of the tailstock
4 Jaw wood chuck, Interchangeable Point Drive and Live Centers