Home > Woodturning and Carving > 4 Jaw wood chuck, Interchangeable Point Drive and Live Centers > Self-Centering Drill Chuck (78)
Self-Centering Drill Chuck
Self-Centering Drill Chuck
On the lathe you can drill a piece mounting this chuck instead of the tailstock

It is fitted into the tailstock and is specifically designed for drilling holes accurately through the centre of the workpiece on the lathe.

Technical data
Ø min Ø max ATTACCO ART code
1 mm 13 mm MT2 131302 J708343K
Item code
131302, J708343K
You May Also:
pagina consigliata
Tailstock interchangeable heads for wood turning
The live wood lathe tailstock has a body formed by an attack Morse taper and a rotating part supported by two bearings lubricated sealed + Ingrado a thrust bearing to support an axial load of 13.200N (about 1.300kg). On this body tailstock apply heads of various shapes depending on the needs of the turning. The tailstock for wood is different from that for metal, in fact, in addition to the tip has a special crown that penetrates a little in wood compressing and holding the work piece by absorbing the effort of turning; the central tip can be removed...