Home > Cutters Drills and Blades > Cutters and cutter heads with bore > Cutterhead set for doors and windows
Cutterhead set for doors and windows
Cutterhead set for windows, Cutter for door outside profiles and frames, 3 pieces cutterhead set for internal doors, Cutterhead set for lifting-sliding doors, Cutterhead set for “Naco” shutters
Cutterhead set for windows
Cutterhead set for windows
Economic a set of cutters head for the handicraft realization of wooden windows
Cutterhead seat of window iron fitting
Cutterhead seat of window iron fitting
Cutterhead for the seat of window iron fitting With an only tool you can fit the iron fittings on 16,3 mm and 18,3 mm thick windows. In fact, on the body of this cutterhead, both the knives for the 16,3 mm position and the other ones for the 18,3 mm position can be fitted. In steel execution with hard metal (HW) knives.
Cutter for door outside profiles and frames
Cutter for door outside profiles and frames
This set consists of 2 cutterheads with steel body and replaceable hard metal (HW) knives, which are already fitted on the cutterhead bodies. It is also includes the spacers for height adjustment and the rounding inserts with their supports to be used for finishing the door profile. You can carry out the door jamb in either horizontal or vertical position by choosing the most suitable rubber insulating gasket for your working. The door jamb can be achieved by combining the two cutterheads together. The height can be adjusted with the two calibrated...
Cutterhead set for internal doors
Cutterhead set for internal doors
3 pieces cutterhead set for internal doors This set is designed to manufacture internal doors ,with a thickness up to 48 mm, and also cabinet doors. You will obtain a door profiled on both sides. The central groove, into which the inner panel is to be inserted, can have a thickness from 8 to max. 1 5 mm. The joint between stile and rail can be adjusted by inserting some spacers between the two elements (included in this set). The 8 - 1 5 mm thick tenon can be also used separately for further applications. The knives are made of hard metal (HW)....
Cutterhead set for lifting-sliding doors
Cutterhead set for lifting-sliding doors
This cutterhead set is designed to produce the groove for AGB lifting-sliding doors. With one pass you can carry out the seat for the most used hardware suitable for a 150 Kg carrying capacity. With a further pass you can execute a deeper seat when using either hardware of a 250 Kg carrying capacity or high guide profile. The cutterhead in the middle is an adjustable tenon of 1 80 mm diameter 1 80 mm and 15 – 30 mm thickness, which can be also used separately for further applications, while the two cutterheads placed below and above can not be used...
Cutter strips of adjustable shutters
Cutter strips of adjustable shutters
This cutterhead is used to produce listels for shutters with either 60 mm or 70 mm length. The set consists of two cutterheads: the upper cutterhead, that is the same one for both listel sizes, and the lower cutterhead, on which it is necessary to fit the knives with radius corrensponding to the iron fittings chosen (r. 5 - 70 mm, r. 1 0 - 60 mm). The two distance rings are already calibrated for the use. In special coated light alloy execution, it is used with hard metal knives and is supplied with two cutterheads with the knives already assebled,...
Cutterhead set for doors and windows