Home > Cutters Drills and Blades > Cutters and cutter heads with bore > Profiled and finger-joint cutterhead
Profiled and finger-joint cutterhead
Cutterhead set for concave grooves, Cutterhead with radius and inclined knives, Rounding cutterhead set, Eagle beak cutter for staff bead, Profiled cutter, Finger joint cutterhead
Finger joint cutterhead
Finger joint cutterhead
This type of joint is the most used, because it is safe and allows a solid union of the pieces. Turning appropriately the grains of wood, you can obtain a stronger joint. The micrometrical adjustment system of the knives is simple and safe and allows a great precision and freedom of choice for the production of different types of joint. In special light alloy execution, this tool can mount HW knives.
Professional Finger joint cutterhead
Professional Finger joint cutterhead
This is one of the fastest and simplest kind of joint. You mould the first work piece according to the height desired. Then you remove the cutterhead from the spindle of your machine, insert the special calibrated 2,5 mm spacer, which is supplied, fit the tool again on the spindle and carry out the second moulding on the second work piece. This tool is fitted with hard metal (HW) knives.
Profiled cutterhead
Profiled cutterhead
The profiled cutter enables you to make numberless combinations for the production of frames suitable for every kind of work. It is in special light alloy execution and is used with hard metal knives (HM).
Cutter for concave grooves
Cutter for concave grooves
This cutter is designed to cut perfect concave grooves. Thanks to the technical feature of this tool, it can enter the wooden piece deeper than the profile of the knive. 3 different radius knives can be fitted on this cutter. On the smaller cutter it is possible to fit the knives of radius 1 2,5 mm, 1 5 mm and 1 7,5 mm, while on the bigger one the knives of radius 20 mm, 22,5 mm and 25 mm.
Cutterhead set for concave grooves
Cutterhead set for concave grooves
This set is designed to cut perfect concave grooves into the workpiece or on the edge of the workpiece. By inserting some spacers between the two elements (included in this set) you can adjust the precision of the radius produced. It is not possible to work with only one of the two elements, which compose this set. 3 different sizes of radius knives can be fitted on this cutterhead. The knives are made of hard metal (HW). On each cutterhead three knife sizes can be fitted: on the smaller cutterhead it is possible to fit the knives of radius 1 2,5 mm,...
Cutterhead with radius and inclined knives
Cutterhead with radius and inclined knives
This cutterhead is universal. It can fit knives with a radius of 5, 6, 8 or 1 0 mm, which are 45° inclined on the upper side. It is supplied with knives of radius 1 0 mm. The other knives must be ordered separately. You can buy a special bearing of calibrated diameter, which enable you to following and round your work piece without using the guides of your spindle moulder machine.
Rounding cutterhead
Rounding cutterhead
This cutterhead produce perfect rounded egdes. 3 different sizes of radius knives can be fitted on each cutterheads. Thanks to the 3° exit angle of the radius knives a perfect finish of the working surface can be obtained. The knives are made of hard metal (HW). On each cutterhead three knife sizes can be fitted: on the smaller cutterhead it is possible to fit the knives of radius 1 2,5 mm, 1 5 mm and 1 7,5 mm, while on the bigger one the knives of radius 20 mm, 22,5 mm and 25 mm.
Eagle beak cutterhead
Eagle beak cutterhead
Eagle beak cutter for staff bead This cutter is designed to cut perfect round mouldings, whithout leaving any inset on the workpiece. Ideal for staff beads for the production of doors and hand rails. 2 different HW profile knives can be fitted on this cutter.
Profiled and finger-joint cutterhead