Home > Cutters Drills and Blades > Router cutters with cylindrical shank > Cylindrical and trimming cutters
Cylindrical and trimming cutters
Cylindrical cutters for grooving and trimming shank with cylindrical shank

The cylindrical cutters are produced to a sharp and double-edged, with or without the third cutting head in different lengths for all the work you want to do.

We also produce cutters with the bearing for making beats or for trimming plastic laminates and covers, to produce doors in honeycomb recovering the central panel and to collect platelets of hinges without chipping your mobile.
Type 1
Type 1
Type 1 Cylindrical fly cutter Z1 Cylindrical fly cutter This cutter enables you to create narrow and deep grooves. This will allow you to encase bottom and sides of drawers. In this case the grooves should be at least 0,1 mm wider than the thickness of the plywood. This precision tool is also indispensable to create the basis for a briar-wood fillet.
Type 2
Type 2
Type 2 Cylindrical cutter HM without bottom tip Z2 Cylindrical cutter without bottom tip By using cylindrical cutters without the third frontal cutting edge, not end milling, the top finish of the bottom of the groove is given from the frontal sharpening of the side-cutting edges. They have been designed for cutting the wood sideways, but they can also working in the middle of the wood piece for a few milimeters, but of course you will have to finish the bottom of the groove by using the side-cutting edges. The expert suggests: please use cutters...
Type 2 hsc
Type 2 hsc
Type 2 hsc Steel cylindrical cutter Z2 Steel cylindrical cutter You can use all the cylindrical cutters with two cutting edges for rebates, grooves, joints, slides, mortises. We suggest you to make shutter-doors in furniture which need change of air (shoe-racks, furniture for boiler, etc...).
Type 2 TT
Type 2 TT
Tipe 2 TT Cylindrical cutter HM with bottom tip Z2 - 1 Cylindrical cutter with bottom tip Carbide cutters cut all composite materials and if they have a bottom tip, they are suitable also for boring. That means they can entering into the woodpiece with all cutting height in one single time and then make the pass and create the groove. The frontal sharpening of the side-cutting edges allows for a top finish. In order to prepare old window frames for double window panes, all you need to do is to level the old groove, fasten the panes with silicone...
Type 2 TT L
Type 2 TT L
Type 2 TT L Cylindrical long cutter HM with bottom tip Z2-1 Cylindrical long cutter with bottom tip In order to fit the iron fittings for windows with leaf, you can use cylindrical cutters with the suitable diameter. The iron fitting's producer supply you with template guides, which have to be followed with a sleeve Ø 27 mm fastened at the machine. When you choose the cutter, consider that the template guides reduce the stroke of the milling machine and some millings have to be executed in the lower part of the frame.
Type 2C
Type 2C
Type 2C Rabbeting cutter HM Z2 Rabbeting cutter This cutter is equipped with a Ø 1 3 mm bearing and the other substitutive bearings are sold separately. All these ball bearings can also be used for the other cutters with interchangeable ball bearings. By using the bearings of Ø 7, 1 0, 1 3, 1 9 mm, it is possible to obtain accurate rebates which can be repeated over and over, for example in the construction of furniture. Besides with a Ø 32 mm bearing this cutter can be used for trimming. Since the diameter of this cutter allows for a...
| Type 2 S
| Type 2 S
Type C
Type C
Type C Lower bearing guided trimming cutter HM Lower bearing guided trimming cutter This is a well-known and frequently used trimming cutter. It is produced by highly qualified staff on CNC machines. Precision and a continuously repeated work are at the bottom of our quality control.
Type C up Upper bearing guided trimming cutter
Type C up Upper bearing guided trimming cutter
This is a well-known and frequently used trimming cutter.
Type C2 Double trimming cutter
Type C2 Double trimming cutter
This is a well-known and frequently used trimming cutter.
Type R Pivot trimming cutter
Type R Pivot trimming cutter
Pivot trimming cutter
Type G1 V-Shape drill point pivot trimming cutter
Type G1 V-Shape drill point pivot trimming cutter
V-Shape drill point pivot trimming cutter With this cutter perforating and trimming can be done in one single operation. Practical advice: It can be used to build a door: the walnut-plywood is glued onto the frame, and after that the exceeding part in the middle will be removed with the cutter, thus leaving space for the glass; this middle part can then be used otherwise.
Type G2
Type G2
Double V-Shape drill point pivot trimming cutter With this cutter can make the drilling of two panels glued to your door or doors and contemporary trim panels also recovered for future use.
Type N
Type N
Cutter for milling the seat of metal plates With negative shear angle design, this cutter guarantee you a perfect Mortise hinges with no splintered edges or rough bottoms.
Type DD Double-edge cutter
Type DD Double-edge cutter
You can use all the cylindrical cutters with two cutting edges for rebates, grooves, joints, slides, mortises. We suggest you to make shutter-doors in furniture which need change of air (shoe-racks, furniture for boiler, etc...).
Cylindrical and trimming cutters